A KÉP CSAK ILLUSZTRÁCIÓ!
F-Tool PIN BrassClamp
The F-Tool PIN BrassClamp is a brass retainer with hardened, corrosion-resistant pull-down jaws. If necessary, the stop surface on
the holder can be milled to approx. 28 mm. The BrassClamp is supplied as standard with 3 clamping jaws with a clamping range
of 0-3 mm. The BrassClamp is suited for use as an electrode (in particular graphite) retainer. However, it can also be used as
precision parts clamp, because the brass jaw can be enlarged precisely.
B40 = prepared for PIN system, 3R adapter plate, T-slides and grid plate 40 mm/M8. Delivered with screws
ITS 50 = equipped with ITS centering plates 50 / EWIS preparation. Delivered with ITS chucking spigot F/A
FTool PIN BrassClamp 72 x 72mm ITS50
Legyen Ön az első, aki véleményt ír!
